Access high-quality natural antibacterials at your disposal.
Produce high-quality ionic/colloidal silver
Can be used topically and internally
Preserves a Woman’s PH
With the onset of antibiotics silver effectively vanished from the medicinal market in the early 20th century. One reason is that it can not be patented and thereby fetch extraordinary profits for Big Pharma. In modern lab tests (e.g. by NCBI) silver is getting its fame back as a safe, multi-purpose bacterial killer. It is the only known agent to kill e.g. MRSA and has been tested against 650 common and exotic infections and diseases. Instead of compromising the immune system like antibiotics do, it helps boost your resistance. It is gaining popularity not only in alternative circles but increasingly by mainstream doctors to fight both superbugs and common ailments. However, purchasing it in high-quality form is an expensive affair, which is why we introduced the Silver Healer.
We scoured the market to find the most cost-efficient, high-grade, portable ionic/colloidal silver generator in the market. For maximum health benefits, Silver Healer produces a nano-particle blend of ionic and colloidal silver that can be easily absorbed by the body. It is one of the most powerful natural antibiotics in existence. It’s extremely simple to use, and it’s the only solution in this price class that uses a custom microprocessor to make sure particle size is optimized. Silver Healer pays itself back in less than a few months if you are an active colloidal silver user (one ounce of colloidal silver in health food store costs $18-20)! With Silver Healer you get a natural antibiotic at your disposal, where ever you are (small enough to travel), with the best possible quality guarantee.
The Silver Healer is unique among other silver engines because of an unparalleled symphony of properties. Highly important among those is its “constant current” design. A constant current system varies the voltage across an electronic circuit to maintain a constant electric current. Maintaining a low density, stable current ensures that the ionic/colloidal silver blend produced by the Silver Healer is uniformly nano-sized and consistent from batch to batch. The case is produced using cutting-edge 3D printing, which makes it simultaneously lightweight and strong, while incredibly internally detailed. This case literally cannot be produced by conventional injection molding techniques. The Silver Healer produces a combination of both ionic and colloidal silver: approximately 70 to 80 percent ionic silver and 20 to 30 percent colloidal silver. Silver ions are individual silver atoms that have lost an electron, leaving them with a positive charge. This is the natural result of using an electric current to disperse silver into distilled water. Colloidal particles are uncharged atoms of silver in various groupings from individual to many multiples of silver atoms. These particles are called “colloidal” because they are so small that they do not settle to the bottom of the liquid. They are not “dissolved” like sugar would be, but rather, the motion of the water molecules keeps them suspended. What happens with the Silver Healer is that silver ions disperse into the distilled water so that initially the product is all ionic, but then some free electrons from the environment join with the ions, and some of the resulting atoms then combine into colloidal particles. Although some argue that colloidal is the most effective form of silver, research shows that colloidal is effective when its particle size is very small, because that allows it to become ionic in the body. Therefore, silver in its ionic form is truly the most effective. The Silver Healer can be adjusted to produce ionic/colloidal silver between about 2ppm and 10ppm. Ppm stands for “Parts Per Million” and is a ratio between the distilled water and the silver. For example, 5ppm means a ratio of five parts of silver to 1,000,000 parts of water, or 5/1,000,000 as a fraction. If you were to drop a one ounce silver medallion into 200,000 ounces of water, it would be exactly 5PPM, although it would do no one any good because it would be a single particle. Although some of the colloidal silver on the market has greater PPM, a higher PPM is not what makes the silver more effective. It’s the size of the particles, which determines its efficiency, as the smaller a particle is, the more easily it is absorbed into the body. When The Silver Healer is shipped, it is set to produce a solution of ~ 5ppm. We feel that the particle size, and therefore the unimaginably vast quantity of particles, is far more important than the exact “parts per million,” and that a 5ppm solution with ionic and nano-sized colloidal content is an ideal compromise between processing time and usefulness. Also, when you are taking 5 ppm ionic/colloidal silver, it is much harder to overdose on it. One of the main arguments against conventional ionic/colloidal silver is that if you take too much of it, it can cause argyria, a disease which turns one’s skin blue. In truth, there have been very few cases of argyria, and those who did develop the disease did not take the proper form of ionic/colloidal silver. In any case, with 5ppm of the nano silver our machine makes, you have nothing to fear. Please review the “safe dosage” standards described here: https://www.silversafety.org The most important factor that determines the effectiveness of the silver is the particle size. Using the science of the Tyndall Effect, we can easily demonstrate that the vast majority of the silver particles that are suspended in the water, using this machine, are less than half a micron in size. Using a violet laser with a wavelength of 405 nanometers (1000nm = 1 micron), we see nothing at all when we shine it through distilled water, but then after we process the water with the Silver Healer, we can see a pale, smoky-like trace of particles. According to the science, we know that the laser wavelength (405 nm) defines the upper limit of the size of the particles that are illuminated; in other words, none of those particles are larger than 405nm, although they might all be far, far smaller. Based on the very low current density electrolytic process we are using, we believe that those particles are in fact all well below 100 nanometers in size (< 1/10th micron), thus justifying our referring to the product as nano-silver. The process does result in a few larger particles here and there, as bits of silver sometimes “flake off” of the rods. This is why we recommend always filtering the product through a paper coffee filter (preferably unbleached) to remove any larger particles. Once you do, you’ll have safe, high-grade nano ionic-colloidal silver at your disposal. If you want to test the product of the machine to make sure it’s been changed, you can shine any ordinary red laser pointer through the pure distilled water before you process it – you should not see a “beam,” though perhaps you’ll see “sparklies”, i.e. little flecks of dust. After you’ve processed a batch, shine the pointer again – you may need to view this against a dark background. You’ll see a faint, smoky “trail” which is silver particles smaller than the wavelength of the red laser light (650 nanometers).
What makes Silver Healer effective?
The Silver Healer produces billions of particles that are well below 100 nanometers in size (less than 1/10th a micron), which effectively makes it Nano Silver. Many people have feared that ionic/colloidal silver could disturb the probiotics in the lower colon, as prescription antibiotics do. However, the particles generated by our machine are so tiny that they are quickly absorbed by the body, and thus they have no negative effect on the probiotics in the lower colon. Smaller silver particles are also more effective at killing microbes, fungus, and infections. The electrical process employed by the Silver Healer produces a balance in the final solution of somewhere between 20% to 30% nano particles and 80% to 70% silver ions.
Agency regulations in 21 CFR 330.10(a)(4)(ii) state that the standards for effectiveness for an OTC drug that is generally recognized as effective include a requirement for controlled clinical investigations. Isolated case reports, random experience, and reports lacking the details that permit scientific evaluation are not considered adequate to establish effectiveness. Testimonials from consumers cannot be considered as adequate proof of effectiveness or safety. None of the comments presented any evidence of safety or effectiveness beyond personal experience. There have been many anecdotal reports of the benefits of ionic/colloidal silver, including the healing of ailments and diseases such as MRSA and breast cancer. Below, we give you an overview of just some of the basic ways you can use Nano Generator to boost your health.
Prior to running, the machine will test the water and will refuse to operate if it senses any conductivity in it. Only distilled water contains no trace of an electric charge and can thus properly conduct the silver ions.
If tapwater is placed in the jar – even accidentally – the Silver Healer simply will not work. It will rapidly flash red to notify the user that the water is not acceptable. This guarantees that your end product will be the purest form of ionic/colloidal silver.
Pour distilled water into the sixteen ounce mason jar, start Silver Healer, and forget about it for a few hours
The machine passes a constant, low electric current through its silver rods, which causes silver ions (charged atoms) to go into the water. The process takes about two hours.
The machine is fully integrated and completely automatic. There are no timers to set or finicky adjustments to make. It plugs in with a USB cord, so you can plug it into your laptop or use a battery-operated USB pack, if you like.